iFi Audio ZEN CAN Signature MZ99

299 

iFi Audio ZEN CAN Signature MZ99

Categories: , Tag: Brands: ,

Description

iFi Audio ZEN CAN Signature MZ99 : Headphone amplifier

The ZEN CAN Signature MZ99 with its tailored ActivEQ is precision tuned to extract the last drop of sonic goodness from Meze 99 headphones.

The majestic Mezes
The original ZEN CAN, our all-analogue headphone amplifier, had the ability to drive tough headphone loads with a balanced circuit design, vanishingly low levels of distortion and exceptional sonics. The specially tuned ZEN CAN Signature 6XX and ZEN CAN Signature HFM swiftly followed.

However, there was one more headphone we thought deserved the ActiveEQ treatment – the Meze 99 Classics.

We love this headphone and know it works well with our gear but we just wanted to push its performance as far as we could.

iFi’s ActivEQ
Our ActivEQ feature combines active and passive components to create a specific EQ curve to suit a particular pair of headphones. This is performed in the analogue domain without adding any additional noise or distortion.

The Meze 99 Classics are revered the world over for their exceptional tonality and dynamic expression – they are loved by artists and audio enthusiasts alike. The ZEN CAN Signature MZ99, with the perfectly matched ActivEQ mode, adjusts the treble for more ‘vivaciousness’, and the enhanced mid-low bass extracts the last drop of sonic goodness from the Meze 99 Classics.

The Meze 99 Classics & ZEN CAN Signature MZ99 performance is simply magnificent.

99 is the magic number
Selecting the MZ99 button on the ZEN CAN Signature MZ99 calibrates its signal to complement the headphone’s response characteristics right across the frequency range. This then tunes its performance to work with Meze 99 headphones.

The ZEN CAN Signature MZ99 does not only work with the Meze 99 Classics, but also with the Meze 99 Neo and the Meze 99 by Drop.

As with our previous ZEN CAN Signature models, this feature can be switched on or off. Without ActivEQ engaged, the ZEN CAN Signature MZ99’s performance will bring out the best in all other headphones and in-ear monitors.

Gain, set, match
The ZEN CAN Signature MZ99 has four gain settings in six dB steps – 0dB, 6dB, 12dB and 18db. We’ve called this PowerMatch.

This enables the amp to precisely suit the connected headphones. Unity gain (0dB) is useful to ensure low noise with sensitive in-ear monitors, while the higher gain settings make the most of tougher headphone loads, delivering excellent dynamic headroom.

XSpace
This analogue processing mode compensates for the ‘in-head localisation’ effect that can occur when using headphones to listen to music that was mixed using a pair of speakers.

It widens the headphone soundstage to deliver a more spacious and speaker-like experience.

ZEN CAN Signature 6XX from iFi audio
Balanced is better
The ZEN CAN Signature MZ99’s circuitry is a balanced, symmetrical dual-mono design – a topology usually reserved for high-end headphone amps – with a number of key elements trickled down from the discrete Class A circuitry developed for iFi’s flagship headphone amplifier, the Pro iCAN.

Key components have been upgraded to enhance performance in line with the improvements made to the ZEN CAN Signature MZ99, including the use of Panasonic OS-CON and Elna Silmic II capacitors.

A ‘meze’ ing
The amp provides magnificent drive capability, delivering 1600mW (7.2V) into 32 ohms from the single-ended output, with 15V+ available to loads of 600 ohms or more through the balanced output.

The ZEN CAN Signature MZ99 delivers monumentally low distortion, rich sonic detail, and mesmerising dynamics and the ability to drive all manner of headphones with ease.

Stay connected
The ZEN CAN Signature MZ99 offers stereo RCA and 3.5mm single-ended inputs, plus a balanced 4.4mm Balanced input. There is also a 4.4mm balanced output so you can connect to power amps equipped with a balanced input.

It features a pair of headphone outputs – a 6.3mm output for headphones that have a standard single-ended connector (compatible with all headphones) and a 4.4mm Balanced output for headphones offering balanced connection.

An increasing number of high-quality headphones and in-ear monitors either come so equipped or give the option of detaching the cable and upgrading to a 4.4mm Balanced connector, and this output makes the most of them (it is particularly recommended for high-impedance headphones).

Making magic happen
The ZEN CAN Signature MZ99 works magically with the ZEN DAC Signature V2.

Although you can buy each unit separately, a ‘ZEN Signature Set’ is also available. This includes both ZEN Signature units plus a high-performance 4.4mm Balanced cable (worth £69 when purchased separately) to connect them together.

When used together, the two ZEN Signatures make an unbeatable, desktop-sized headphone system for both digital and analogue listening.

Majestic measurements
Output Power
ZEN CAN Signature MZ99: 1,600mW
Laptop Headphone: 30mW
52x
more headphone power

A fully-discrete and balanced amplifier audio circuit. The full symmetric dual-mono headphone amplifier with gold-plated 4.4mm balanced connection. Premium engineering is more expensive but lowers the noise floor to a whisper-quiet levels.

Check out the tech note for the details.

As with many other iFi audio products, we’ve incorporated a custom OV Series operational-amplifier. This top-notch component contributes to the extremely low noise, low distortion (0.0001%) and wide bandwidth.

Panasonic OS-CON caps totaling 5,410uF give very-low Equivalent Series Resistance (ESR), excellent noise reduction capability and frequency response characteristics. In addition, OS-CONs have a long-life span and its ESR changes little even at low temperatures since the electrolyte is solid.

They are not often found in products costing <US$1000.

A Tokyo Cosmos Electric Co. (TOCOS) multi-track potentiometer is used. This has close channel matching tolerance for optimal performance (always use above 11 o’ clock).

Switching between settings has been engineered to ensure sonic transparency with advanced trench technology MOSFET is used as a muting switch.

This FET-based switching is handled by a micro-controller, which only ‘wakes up’ when the user changes a setting, thus eradicating any sonically deleterious interference.

TDK C0G (Class 1 ceramic) capacitors offer high stability and low losses for resonant circuit applications.

Getting ever closer to the theoretical ideal of pure, frequency-constant capacitance, these capacitors reduce capacitor-induced distortion to vanishingly low levels.

They are pricey but are a perfect addition to our products.

We use ELNA Japan Silmic II capacitors for the power supplies.

The primary constituent of the newly developed dielectric is silk fibre. This material was believed as unfathomable as an aluminium electrolytic capacitor. The new material beats silk fibre and mixes it with Manila hemp fibre to provide the dielectric to an aluminium electrolytic capacitor used for high-grade music. The result is second-to-none superior acoustic properties and excellent linearity.

 

Specifications : iFi Audio ZEN CAN Signature MZ99

Input Voltage 5V/2.5A
Max Output Balanced

Single-Ended

>15.1V/385 mW (@ 600 Ohm)
>11.0V/1890 mW (@ 64 Ohm)
>6.2V/1200 mW (@ 32 Ohm)
>7.6V/98mW (@ 600 Ohm)
>7.4V/870 mW (@ 64 Ohm)
>7.2V/1600 mW (@ 32 Ohm)
THD&N <0.006% (@ 360 mW/2.4V 16
Ohm)
<0.005% (@ 100 mW/1.27V 16
Ohm)
SNR Balanced
Single-Ended
>121dBA (@ 15.2V )
>120dBA (@ 7.6V )
Max Output Balanced
RCA
3.5mm
7.4V RMS
3.8V RMS
1.92V RMS
Gain 0dB, 6dB, 12dB and 18dB
Frequency Response 10Hz – 200kHz (-3dB)
Power consumption No Signal ~5W
Max Signal ~12W
Dimensions 158 x 117 x 35 mm
6.2″ x 4.6″ x 1.4″
Weight 550 g
1.21 lbs
Line Section
Outputs BAL
UNBAL
6.7V max. (variable)
3.5V max. (variable)
Output Impedance BAL
UNBAL
<200Ω
<100Ω
SNR BAL
UNBAL
<110dB(A) @ 0dBFS
<110dB(A) @ 0dBFS
THD+N BAL
UNBAL
<0.007% @ 0dBFS
<0.015% @ 0dBFS
Headphone Section
Outputs BAL
UNBAL
6.7V max. @ 600Ω
3.5V max. @ 600Ω
Output Power BAL
UNBAL
>1000mW @ 32Ω; >74mW @ 600Ω
>320mW @ 32Ω; >40mW @ 300Ω
Output Impedance BAL
UNBAL
<1Ω
<1Ω
SNR BAL
UNBAL
<116dB(A) @ 0dBFS
<115dB(A) @ 0dBFS
THD+N <0.005% (1V @ 16Ω)