Description
Dali Oberon 1C : Active Wireless Speaker
OBERON 1 C speakers incorporate wireless interface, digital signal processing (DSP) and Class D power amplification electronics in a module located on their rear panels. The two-channel amplification in each OBERON model provides 50 Watts each for the bass/mid and high frequency drivers. Crossover functions within the OBERON C electronics are implemented through DSP running at 24 bit/96 kHz resolution.
There is a small seperate conection box called a sound hub which enables you to easaly connect your wired equipment such as TVs or Turntables whist also incorporating the bluetooth receiver. There are two sound hub options to choose from.
Bluetooth Option
The SOUND HUB COMPACT plays the central role in an active wireless Hi-Fi system along with a stereo pair of OBERON 1 C speakers the sound hub compact receives wired or wierless Bluetooth audio sources and transmits them wirelessly to the speakers. It’s compact dimensions mean is slim enough that it can even be located out-of-sight behind a wall-mounted TV.
With five discrete audio inputs available, the SOUND HUB COMPACT can connect to almost any audio device. For example, there are no less than four ways to connect a TV and transmit its audio to OBERON C speakers, but there are also ample possibilities to connect music streaming or conventional audio devices.
WiFi & Bluetooth Option
OBERON C series speakers are additionally compatible with the DALI SOUND HUB wireless audio preamplifier originally introduced with CALLISTO C series. In addition to providing Bluetooth and a variety of wired audio inputs, the SOUND HUB can be equipped with a Bluesound NPM-1 BluOS module which can provide MQA certified high resolution music streaming and multiroom functionality, as well as supporting Spotify Connect. This can be purchesed as an optional extra or as a upgrade later.
Specifications : Dali Oberon 1C
| Frequency Range (±3 dB) (Hz) | 39 – 26,000 |
|---|---|
| Maximum SPL (dB) | 106 |
| Crossover Frequency (Hz) | 2350 |
| Crossover Principle | Full Active 24 Bit DSP |
| High Frequency Driver | 1 × 29 mm Soft Dome Tweeter |
| Low Frequency Driver | 1 × 5.25″ |
| Enclosure Type | Bass Reflex (Rear ported) |
| Reflex Tuning Frequency (Hz) | 52 |
| Amplifier Output Power | (W) 2 × 50 W |
| Amplifier Type | Class-D |
| Wireless Input | Full 24 Bit / 96 kHz (Not Compressed) |
| Wireless Audio RF Band (MHz) | 5150-5250 MHz and 5725-5875 MHz* |
| Input Mains | Universal Mains 100-240 VAC |
| Maximum Power Consumption (W) | 62 |
| Standby Power Consumption (W) | 1 |
| Networked Standby Power Consumption (W) | 1.25 |
| Time To Enter Networked Standby | < 20 Minutes |
| Recommended Placement | Stand/ Shelf |
| Dimensions (H × W × D) mm | 274 × 162 × 234 |
| Weight (kg/lb) | 4.2 kg / 9 lb |
| Included Accessories | Quick Start Guide
Mains Cable Front Grille Rubber Feet Silicone Bumpers |
Sound Compact
| Wired Inputs | 2 × Optical
1 × Analogue Stereo (RCA) 1 × HDMI (ARC) |
|---|---|
| Input Impedance RCA (Ohm) | 7.2 k |
| Max Input (RCA) | 3.0 Vp |
| Maximum Optical Digital Input Resolution (Bits/kHz) | 24 / 192 |
| Wired Outputs | 1 × SUB OUT (RCA with Detection) |
| SUB Output Max Voltage (V) | 1.7 V RMS |
| Wireless Inputs | BT 5.0, AAC, aptX, aptX HD |
| Wireless Output | Full 24 Bit / 96 kHz (Not Compressed) |
| Wireless Audio RF Band (MHz) | 5150-5250 MHz and 5725-5875 MHz |
| Other Connections | 1 × IR Sensor Input
1 × USB-A power output (5 V/1.5 A) Service |
| Power Input | 9V DC |
| Maximum Power Consumption (W) | 2.8 W |
| Standby Power Consumption (W) | 1.7 W |
| Time To Enter Networked Standby | < 20 Minutes |
| Dimensions (H × W × D) mm | 30 × 212 × 132 mm (1.2 × 8.4 × 5.2 in) |
| Included Accessories | Quick start Guide
IR Remote Control 9V DC Power Supply (Universal 100-240 VAC) IR Sensor |
| Weight (Kg/lb) | 0.5 Kg |
