Description
Canor Audio Virtus I2 : Tube Integrated Amplifier
The Virtus I2 is a new-generation tube amplifier that utilizes KT88 high-power tubes and features an entirely new topology.
The goal of its development was to enhance the superior sound quality of the previous model version. This amplifier runs in a pure class A with an auto-bias function, as well as cathode feedback.
- an integrated tube amplifier operating in class A, providing an output power of 2 x 40 W
- KT88 high-power tubes with autobias with a cathode feedback
- an option to switch between triode and ultra-linear mode instantly
- PCB’s utilize our premium CMT ™ technology
- perfect channel separation using a relay attenuator that features individual blocks for each channel. The gain control is in increments of 1 dB and attenuates up to 63 dB
- the independently powered control part
- capacitors with high capacitance in the filter provide energy for precise and well-defined bass
- the signal path exclusively contains high-quality polypropylene capacitors
- precise selection and pairing of the tubes meeting above-average parameters
- the synchronous control option allows the use of two amplifiers in a monoblock mode without the need for an extra preamplifier. This Master/Slave mode has an output power of 80 W per channel
Specifications :
| Output power | 2 x 40 W /4,8 Ω – ultralinear 2 x 20 W /4,8 Ω – triode |
| Gain | -30 dB (at 8 Ω) -28 dB (at 4 Ω) |
| Inputs sensitivity | 500 mV |
| Frequency range | (10 – 50 000) Hz ±0,5 dB / 5 W |
| Input impedance | 30 kΩ |
| Inputs | 4 x RCA, 2 x XLR (XLR are active in monoblock connection only) |
| Outputs | 1 x RCA Line-out (Line fix) |
| Total Harmonic Distortion | <0,05% / 1 kHz, 5 W |
| Signal-to-noise ratio | > 95 dB |
| Filtration capacity | 2200uF / 500V |
| Damping factor at 4 Ω load at the output | 9 (based on measured output impedance) |
| Damping factor at 8 Ω load at the output | 10,5 (based on measured output impedance) |
| Tube complement | 4 x KT88 / 1 x 12AX7 / 2 x 12AT7 |
| Power | 230 V / 50 Hz / 375 VA |
| Input power | 220W |
| Dimensions (w x h x d) | 435 x 170 x 485 mm |
| Weight (net) | 26 kg |
