NAD C389 Hybrid Digital DAC Amplifier

NAD C 389 HybridDigital DAC Amplifier

1 599 €

NAD C389

Catégories : , Étiquette : Marque:

Description

NAD C 389 HybridDigital DAC Amplifier

  • Customized HybridDigital UcD amplifier in fully balanced bridged configuration
  • Continuous Power: 130 Watts per channel into 8/4 ohms
  • Instantaneous Power: 210 W into 8 ohms, 300 W into 4 ohms, 350 Watts per channel
  • Vanishingly low harmonic and intermodulation distortion
  • Nearly unmeasurable noise through the entire audioband
  • Dual MDC2 ports for expanded functionality
  • Optional MDC2 BluOS-D module adds BluOS Hi-Res multi-room music streaming and Dirac Live room correction
  • Jitter-free 32-bit/384kHz ESS Sabre 9028 DAC
  • Ultra-low-noise MM phono stage with infrasonic filtering circuitry
  • Two optical, two coaxial digital inputs
  • HDMI-eARC input
  • Two pairs of line-level analogue inputs with ultra-low-noise buffer amplifiers
  • Two sets of speaker outputs
  • Two-way Qualcomm aptX HD Bluetooth
  • Dual subwoofer outputs
  • Dedicated headphone amplifier
  • CI-Friendly – IR remote, 12V Trigger in/out, IR in/out, RS-232 Serial port
  • Seamless integrations with smarthome control systems such as Control4, Crestron, RTI, URC, Lutron, and Elan

Specifications C 389

PREAMPLIFIER SECTION
LINE INPUT, PRE-OUT (ANALOG BYPASS ON)
THD (20Hz – 20kHz) <0.002 % at 2 V out
Signal-to-Noise Ratio >106dB (IHF; A-weighted, ref. 500 mV out, unity gain)
Channel separation >100dB (1 kHz); >90 dB (10 kHz)
Input Impedance (R and C) 56 kohms + 100 pF
Maximum input signal >4.6 Vrms (ref. 0.1 % THD)
Output impedance Source Z + 320 ohms
Input sensitivity 65mV (ref. 500 mV out, Volume maximum)
Frequency response ±0.3 dB (20 Hz – 20 kHz)
Maximum voltage output -IHF load >>5 V (ref. 0.1 % THD)
PHONO INPUT, PRE-OUT (ANALOG BYPASS ON)
THD (20Hz – 20kHz) <0.01% at 2 V out
Signal-to-Noise Ratio >84dB (200 ohms source; A-weighted, ref. 500 mV out)
Input sensitivity 46 kohms/100 pF
Frequency response ±0.3 dB (20 Hz – 20 kHz)
Maximum input signal at 1kHz >80 mVrms (ref. 0.1 % THD)
LINE INPUT, HEADPHONE OUT (ANALOG BYPASS ON)
THD (20Hz – 20kHz) <0.005% at 1V out
Signal-to-Noise Ratio >107 dB (32 ohms loads; A-WTD, ref. 1V out, unity gain
Frequency response ±0.3 dB (20 Hz – 20 kHz)
Channel separation >62 dB at 1kHz Output impedance 2.2 Ohms
LINE IN, SPEAKER OUT (ANALOG BYPASS ON)
Continuous output power into 8 ohms and 4 ohms 2 x 130W
THD (20 Hz – 20 kHz) <0.02% (250 mW to 130 W, 8 ohms and 4 ohms)
Signal-to-Noise Ratio >95 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
Clipping power 150W
IHF dynamic power 210W into 8 ohms 300W into 4 ohms 350W into 2 ohms
Peak output current >26A (in 1 ohm, 1ms)
Damping factor >150 (ref. 8 ohms, 20Hz to 6.5kHz)
Frequency response ±0.3 dB (20 Hz – 20 kHz)
Channel separation >90dB (1 kHz) >75dB (10 kHz)
Input sensitivity (for 130 W in 8 ohms) Line In: 201 mV, Digital In: 10.25% FS
GENERAL SPECIFICATIONS
Supports bit rate/sample rate up to 32 bit/384 kHz
Frequency band 2.402GHz- 2.480GHz
Maximum transmit power (dBm) 7 dBm ± 2 dBm
DIMENSIONS AND WEIGHT
Gross dimensions (W x H x D) 435 x 100 x 390mm (17.1 x 3.9 x 15.4“)
Net Weight 8.7kg (19.1lb)
Shipping weight ~11kg (24.2lb)

Produits similaires